• This topic has 4 replies, 3 voices, and was last updated 11 years ago by Anonymous.

TL-WR841ND (openwrt) PPTP VPN WITH STRONGVPN

  • Anonymous June 30, 2015 at 5:44 pm

    Hi all, i’m trying to setup an tl-wr841nd (openwrt) with a pppt vpn with strongvpn.

    i successfully configured the vpn on the router . the vpn connect regullary to strongvpn but if in the firewall setting of the interface vpn i assign the firewall-zone to the wan the computer wired connected to the router (with cable) can navigate with the strongvpn ip.

    the wireless client cannot navigate.

    someone can help me in configuring it?

    i hope yes…

    Siroki Istvan July 1, 2015 at 1:00 pm

    Hi,

    I’m afraid you are asking this on the wrong forum. We don’t provide general support for OpenWRT, only what’s related to our hotspot service.

    Anonymous July 4, 2015 at 9:19 pm

    I m an hotspot system customer with the firmwate on the router provided by hotspotsystem.

    I dont need general help in openwrt but it is related to your service.

    Thank you

    stevehars July 8, 2015 at 5:54 pm

    Confirm please that this solution has been working so far. Once the PPTP gateway has been set up, you need to put its interface name in the WAN_IF section of the coova-chilli configuration file under /etc/chilli/defaults.
    From there it uses the PPTP tunnel as the internet source.

    Regards,
    Steve

    Anonymous August 22, 2015 at 3:35 pm

    Hi,sorry for delay but i was in holydays…

    YES..it works!! it is wking wiyh purevpn for now..i tried also with strongvp and it works too!

    thank you very much!

0 0

You must be logged in to reply to this topic.