Linksys Wrt54Gl Cannot Link To Start Page

  • Anonymous March 1, 2012 at 4:22 am

    Hi there,

    Hope you can clarify some doubts..

    Scope: LINKSYS WRT54GL ver 1.1 router, Flashed sucessfully for code HotSpotWRT/CoovaAP, I can see the router at my location on hotspotsystem.com, but when I access the router as a user the start page doesn’t appear, it skips directly to internet even if everything looks fine at HOTSPOT configuration section in the router, and Settings like DNS are correct, etc.

    Also I have another WRT54GL flashed sucessfully for code DD-WRTv24 Nokaid/Standard/Mega/Special, again, everything looks fine at the HotSpot router configuration, and Settings like DNS, are correct etc.

    I wonder if WRT54GL is still elegible for hotspot function, or what is happening?

    (Weeks ago I configure a LINKSYS WRT320N. I dont have any problem, everything works fine. There is the Start Page when connected.)

    I’ll appreciate any comment.

    Thank You.

    Anonymous March 1, 2012 at 11:31 am

    Hi,

    We have not had any problems with the WRT54GL, in fact it is a very reliable router to use.

    First I will need you to tell me what the ip address is that the routers give you when connecting?

    What is the build number of DD-wrt that you are using on the 2nd router? Did you use the built in or the command based setup method?

    Anonymous March 1, 2012 at 5:41 pm

    Hello,

    Now is connecter WRT54GL router flashed with command based setup method, the fimware is DD-WRT v24-sp2 (10/10/09) std

    Router’s IP: 148.223.136.78 (at hotspotsystem.com) the local router IP Address is 192.168.20.1 (and DHCP is enabled)

    Router can be accessed remotely by 8080 port

    Some times give to clients IP from segment 192.168.20.x some times gives 192.168.182.x

    Hope you can help me. My head will be cutted if I cannot fix it =[

    Thak You.

    Anonymous March 2, 2012 at 12:46 pm

    The right ip address you should get is 192.168.182.X. At this point you should see the splash page when trying to navigate to the internet. If not, then check to see if you have a DNS server configured. You can use your ISP’s DNS server, or Google’s free server of 8.8.8.8. If properly configured, a ping should resolve: ping hotspotsystem.com

    Also check that you are able to ping our server: 195.228.254.149. If not, then preform a trace route to see the last hop the traffic is getting blocked at.

    Regards,

    Marko

    Anonymous March 2, 2012 at 8:38 pm

    Hi

    I’m still stucked =[. Could you please recommend a firmware version for the WRT54GL version 1.1? There are a some options (see file attached) So I would like to know wich one has been tested sucessfully.

    I’ll appreciate your advices.

    Thank You.

    Anonymous March 3, 2012 at 2:02 am

    Hi,

    Finally, I can Fix the problem, I used both firmware the dd-wrt.24_mini_generic.bin and dd-wrt.24_std_generic.bin from another website instead and works fine!!

    Thank you for your time.

    Regards.

0 0
Tagged: 

You must be logged in to reply to this topic.