Problems With New Install

  • Anonymous May 21, 2012 at 5:47 pm

    Router NameDD-WRT

    Router ModelBuffalo WZR-HP-G300NH2

    Firmware Version

    DD-WRT v24SP2-MULTI (10/31/11) std – build 17798

    username: hdpate

    location id : 1

    DHCP: LAN

    Remote network: 192.168.182.0/24>>>>>>>does this need to be changed?

    special settings: enable

    https

    login spalsh page: enable

    I have already ran the command. And once enable the hotspotsystem from Buffalo>>Service>>hotspot. And it resets, I get connected to my original SSID but no interent connection is there..just get error message of page cannot load. Do I need to turn of my WPA secruity and SSID settings, or is there something else I am missing.All I want is for guests to logon and be prompted with splash page with terms and agreement accpetance. Nothing else for now, if it work then I can upgrade for payments.

    Thanks

    Anonymous May 22, 2012 at 1:31 pm

    The settings are fine. Connect to the router with telnet and see if chili is running, if not try to start it and let me know if you get an error:http://hotspotsystem…=7681-YOAN-6356

    If it is running, check to see what the ip address you get when connecting to the router?

0 0

You must be logged in to reply to this topic.