No Splash Screen

  • Anonymous August 16, 2012 at 8:09 pm

    I just installed a hotspot at a Wendy's store and all was tested and working before the installation, but now I cannot get the splash screen to show. I do have wifi that is wide open but no logon screen at all. The hotspot router is behind another router and my internet feed to the first router is a WISP using a private IP address. I am not sure if that may be the issue. Do any ports need to be forwared? If so, do I need to have the same ports open in the WISP's router?

    Anonymous August 16, 2012 at 8:24 pm

    Additional information: When I click the “hotspot” tab in the router setup I get a screen that says “eval: 1: Syntax error: unterminated quoted string”.

    Anonymous August 17, 2012 at 6:28 am

    you definately need to have UDP ports 1812 and 1813 forwarded to your router running the hotspot i also usually use opendns on my routers always a help 208.67.222.222 and 208.67.220.220, dont know why you are getting a syntax error tho

    Anonymous August 17, 2012 at 8:28 am

    Does the splash screen show on a smart phone or Iphone?

    Anonymous August 17, 2012 at 11:47 am

    Phone is the same, no screen but I do have wifi

    Anonymous August 17, 2012 at 12:44 pm

    What is the ip address you get when connecting to it?

    Anonymous August 17, 2012 at 1:45 pm

    That is a good question and gets me thinking. I am inside a router running DNS and I am getting 192.168.1.122, but I still log on with 192.168.20.1. Should I be running DNS on the 192.168.20.# network? If so, how ca this pass through the 192.168.1.1 gateway?

    Anonymous August 17, 2012 at 2:15 pm

    If the hotspot is running you should get an ip address on the 192.168.182.0 network, unless you changed the hotspot network setting, which is not recommended. Can you check the processes to see whether chilli is running? It should be on the status/system page, or you can telnet the router and issue the top command.

    Have you configured a dns server yet?

    Anonymous December 4, 2012 at 6:19 am

    Steps to follow to get hotspot IP i.e. 192.168.182.X

    1 first check internet is live on your router.

    2 check chilli is running with command ps – ef | grep chilli

    3. Now connect to your hotspot router you should see the hotspot IP

    @Marko

    I did all this steps and i achieved all above but when i try to browse it gives me error NASID does not exist,NASID should be operator username_location id.

    Please help me how can i find the value to get login page.

0 0

You must be logged in to reply to this topic.