Can't Join Administrator Panel After Setup "hotspotsystem Login"

  • Anonymous November 7, 2012 at 9:48 pm

    first of all i connect my pc to the router using 192.168.1.1 ip – my pc ip: 192.168.1.2

    than i do this step:

    • change user and password of cp into the router

    • services —> hotspot —> username and location id

    the router restart his software than i get 192.168.182.2 (pc ip) and 192.168.181.1 (router dd-wrt)

    now i can't join more the router administrator page.

    why that?

    tnx

    Anonymous November 8, 2012 at 6:38 pm

    You have to use a static ip address to access the router's admin page.

    Anonymous November 12, 2012 at 4:27 pm

    ok. let me try.

    i've to manually set 192.168.182.XXX manually?

    Anonymous November 12, 2012 at 5:22 pm

    No, that's the hotspot network. Set an ip on the LAN network.

    Anonymous February 26, 2013 at 3:09 am

    Last time my login IP is 192.168.2.1 after I using the hotspot I couldn't login to the admin pages. How to allow admin to login to edit the setting?

    Anonymous February 26, 2013 at 10:31 am

    It's allowed by default. However you may have to log in to the hotspot first before you can access the hotspot. Are you sure that the router's LAN IP was 192.168.2.1 ? In our guides we suggest to set it to 192.168.20.1 .

    Anonymous February 27, 2013 at 2:07 am

    Ya my default router IP address is 192.168.2.1 but once I connected with the hotspot the IP is 192.168.182.X but when the time I couldn't login to the router page. The setup I refer from this URL http://www.hotspotsy…de_openwrt.html so how can I login to the router page?

    What i needed is I just want the LAN port user can login to the router page.

0 0

You must be logged in to reply to this topic.