Dd-Wrt V24-Sp2 (03/25/13) Std, Cannot Get To Splash Page

  • Anonymous July 4, 2013 at 9:10 pm

    I installed the system and is able to get to internet, but I am unable to get client to goto splash page first.

    In basic setup, I have “Use DNSMasq for DHCP”,”Use DNSMasq for DNS”, and “DHCP-Authoritative” unchecked.

    In wireless, I made the virtual interface for 2.4GHz and 5Ghz mode.

    In service–>hotspot, I had enabled hotspot system and Login on splash page.

    I see the virtual interface’s SSID, I am able to connect to it, but then it just lets me browse right away with no login splash page.

    All wireless mode(physical and virtual) are set to AP, with the virtual set to bridge(unbridge will not allow internet access at all), router is WZR-600DHP, but after installing DD-WRT V24-sp2, the firmware is reading it as Buffalo WZR-HP-AG300H

0 0

You must be logged in to reply to this topic.