Limited Connectivity With Hotspotsystem Is Enabled.

  • Anonymous October 17, 2013 at 5:51 pm

    I am running a linksys e2500 that has been flashed with dd-wrt v24 big. It function perfectly until I enable hotspotsystem. I then receive a limited connectivity notice and am unable to connect to the internet through wifi or hard wired. Is this a known limitation with dd-wrt or is it possibly something I am missing. I have reviewed the hotspot settings and everything is set correctly.

    Thanks for the help.

    Dimitrios October 17, 2013 at 6:08 pm

    We recommend you use build 22118 of the dd-wrt firmware for this router. Please navigate to http://www.dd-wrt.com/site/support/other-downloads and browse to the following directory: others › eko › BrainSlayer-V24-preSP2 › 2013 › 07-24-2013-r22118 › broadcom_K26. Please note that all the steps have to be performed exactly as indicated in our installation guide.

    Anonymous October 17, 2013 at 11:24 pm

    Thank you after changing the DNS settings I was able to get the wifi to work but I am not getting redirected to the splash page.

    Dimitrios October 18, 2013 at 7:11 pm

    Thank you for your reply. Are you using the latest build that we recommended?

    Anonymous October 18, 2013 at 7:51 pm

    Yes I have upgraded from build 19xxx to 22118

    Dimitrios October 18, 2013 at 7:59 pm

    Please perform the steps exactly as indicate in our tutorial: http://www.hotspotsystem.com/installation-guide-dd-wrt
    We advice you to press and hold the reset button on back of the router for 30 seconds while the router is powered on and perform our tutorial from scratch. You don’t need to install the firmware again, we just ask you to perform the settings again.

    In case the issue remains please open a support ticket (http://www.hotspotsystem.com/hotspot_help/new-ticket) and attach screenshots of all you router administrator settings so we can have a look and indicate the incorrect setting.

0 0

You must be logged in to reply to this topic.