Anonymous November 11, 2011 at 3:45 am

Thanks for hanging in there with me. Okay I now am beginning to understand the instructions. I modify the control panel at Hotspots, but I am having trouble with the steps in the router:

Go to Services > Hotspot, then:

  • Special Settings > ENABLE

  • Display Login on Splash Page (Combined) > UNCHECK

  • I have a “logon splash page” the option is “Enable or Disable box” if I choose enable I cannot check (walled garden) If I do check disable I can check the wall garden box input the domain name, but after saving these settings when go to do a test from the wireless connection I get an error page from the dd-wrt firmware “Error: you must enable “login on Splash page’ under special settings when you set the router if you are using dd-wrt with build in setup

  • Custom Splash Page (Walled Garden) > CHECK

  • In the UAM allowed field, enter: http://www.yoursite.com (your domain where your special page is hosted, ONLY THE DOMAIN NAME!)

If there are no such settings in DD-WRT, then you can use the setup command method to re-setup your router:

  • Go to HotSpot Locations > Click on the location’s name > Copy the setup command

  • Paste and Run the setup command again from the router’s admin page