Hello,
A few things to clear.
First off, please do not modify the hotspot subnet of 192.168.182.0 unless you have specific problems.
Second, the WAN and LAN side of the hotspot router/computer cannot be in the same subnet, for networking standard reasons.
The following syntax is not OK: ‘HS_DYNIP=192.168.1’ in the default.conf file.
You cannot avoid NAT, otherwise coovachilli simply won’t work. So you have to enable it, by setting up two different subnets(and masquerading) on the two sides of the coovachilli processing network ‘node’.
Let me know how it goes.
Best Regards,
Steve Hars,
Hotspotsystem.com