Thank you for the screenshot. If you haven’t performed any changes on the router settings of the openwrt router and just executed the script then you should be getting the hotspot splash page.Please note that the router you are using is around 10 years old (wrt54g). From the very beginning we always recommended the newer Linksys WRT54GL and not the WRT54G.In your youtube video you performed the process perfectly. You didn’t miss any step. Just it didn’t work for your type of router.What we suspect is that the versions of the dd-wrt firmware and openwrt you are using are brand new and will not work on your router.We recommend you use a very old version of dd-wrt firmware that is capable of bringing up the hotspot splash page. The build number we recommend for your router is 14311. This version of dd-wrt was around when your router was sold in the market and our company is also integrated in that build.In order to remove the openwrt firmware you need to reset your router while its being powered on. Unplug the power cable and while the router is being powered on hold the reset button which is found at the back of the router until the front lights of the router are flashing. During the first minute of the reset you need to tftp to the router and upload the linksys factory firmware. When that is completed you need to upload the dd-wrt firmware.You can use a programme like Pumpkin to tftp to the router. Please make sure you first upload the Linksys factory firmware.If you need further help with the steps please let us know in order to support you.
thanks you for your support…have you any direct link for the dd-wrt firmware suggested?