Hello,
The newest build of DD-WRT uses coovachilli. The memory leakage problem has been resolved.
You can use location IDs like: 1_wds_1 1_wds_2 etc, they don’t have to be connected with WDS, they will appear according to their naming in the control center.
You don’t have to use virtual interfaces at all, you need to use the built-in setup, command setup won’t work.
If you have trouble getting it working, try to unbridge the physical wireless interface (if hidden, then under Advanced) and then assign the hotspot DHCP node to it (will become wl0 or eth1 or ath1).
Also try to uncheck ‘Use DNSMasq for DHCP’, ‘Use DNSMasw for DNS’ and ‘DHCP-Authoritative’ checkboxes under Setup>Basic Setup .
Let us know if you had further questions.
Regards,
Steve Hars,
Hotspotsystem.com