Ubiquiti Picostation M2 Hp Not Working On 5.5.2

  • Anonymous September 27, 2012 at 5:46 am

    Hello,

    i have read your guidline four the Airmax version of the ubiquiti Picostation M2

    i have firmware 5.5 and tried to downgrade it to 5.3.5 in vaine i have downloaded your version

    Hotspotsystem.XM.v5.3.5.sdk.0001.120228 that one had a bad firmware warning and the other one

    Hotspotsystem.XM.v50.3.5.sdk.0001.120831 witch was accepted but failed to boot up and no ip adresse

    i managed throut the ubiquiti forum to restore the original 5.5 and noted that other too had problemes downgrading to 5.3.5

    reading further i understood that the only solution to the pb is to build a hotspot version of airos from version 5.5 sdk

    i have no programing backround, i read that the nice people from HOTSPOTSYSTEM may be able to do that

    i stayed up all night, the problem is that i have to intall 10 pico's for a show today, if it possible for the technicians from HSS to complie it for me (and others), i would be really grateful

    Regards

    Arye

    Anonymous September 27, 2012 at 9:46 am

    Hello,

    you have two options:

    1. Connect a LAN cable from the INTERNET port of the router to your computer. Set your computer a static IP like 192.168.1.2, netmask 255.255.255.0 . The router should be available at 192.168.1.20

    2. Connect a LAN cable from the LAN port of the router to the computer, be sure that no other cables are connected to the internet port. Set your computer to get an IP from the router via DHCP. You should get an IP from the router like 192.168.20.47 . The router should be available at 192.168.20.1 (if you cannot connect you have to wait).

    Please let me know the results.

    Anonymous September 27, 2012 at 6:47 pm

    hello Rolland

    Thank you for you fast answer, just to let you know that the people at ubiquiti has perposly remouve downgrade option in 5.5.2. i have managed to flash it back to 5.5

    the Real question is

    can you make me a skd from 5.5 for hotspotsystem please

    Arye

    Anonymous September 28, 2012 at 8:18 am

    Thanks for the information. We will work on a firmware based on AirOS 5.5 as it seems that there were some hardware changes which makes impossible to run an older firmware on newer Airrouters.

    Anonymous September 28, 2012 at 9:38 am

    Thank you roland for the modified firmware 5.5 when would you think that it will be ready for download as i have a 10 pico ready to be set up for a show.

    Anonymous September 28, 2012 at 12:54 pm

    I cannot give you a timeframe for this but we give this a priority.

    Anonymous October 24, 2012 at 2:53 pm

    I also got some of the new devices (Bullet M2 HP / DC-9F-DB…) and still waiting for the new firmware. Are you still working on it or is it already released?

    Anonymous November 2, 2012 at 9:41 am

    Currently we are waiting for the new software from Ubiquiti so we can finish the updated version. After it, we are ready to update our firmware.

    Anonymous November 5, 2012 at 9:53 am

    Sounds great! Can't wait to go online…

    Anonymous December 10, 2012 at 12:51 pm

    3 months later and still nothing…

    Anonymous December 10, 2012 at 1:17 pm

    Yes, this is sad news for us too. We are still waiting for the firmware from Ubiquiti 🙁

    Anonymous December 17, 2012 at 1:46 am

    Still no news from Ubiquiti ?. I have 3 Bullet M2 HP.

    In waiting the new firmware from ubiquiti, I just bought a linksys WRT54G router on Ebay. My plan was to connect my Bullets M2 HP on the Lan port of the Linksys router (I flashed it with the HotspotWRT firmware and enable the Hotspotsystem on wireless and lan). My Bullet is set as Acces Point without security setting.

    I am able to connect to the Bullet Access Point, but I do not have internet access, I do not have access to the HotspotSystem splash page. (the HotspotSystem works fine if I connect the computer directly with a cable to the Linksys Router Lan port).

    Does someone have an idea ?

    Anonymous December 21, 2012 at 10:13 pm

    Ubiquiti changed the rules of using the SDK recently, we are still dealing with them to get the latest version. We do everything we can to get it as soon as possible.

    Anonymous January 15, 2013 at 3:52 am

    Hi, I have a rocket M2 with the new mac address (DC-9F-D:cool: any news on the new firmware? because I have 2 hotspots to deploy and no compatible firmware or is there any work arround? thanks.

    Ivan

    Anonymous January 15, 2013 at 9:34 am

    Hello,

    we are working on it and hopefully it will be available in 2 weeks.

0 0
Tagged: 
1 2

You must be logged in to reply to this topic.