1043ND v2 openWrt.factury.bin no works

  • Anonymous April 2, 2015 at 2:20 pm

    hallo,
    i have flash the factury bin at first,
    i see the SSID from Hotspotsystem on my TP-Link,
    the LED of internet ist ok on Tp-link
    but i cant go to webinterface or putty telnet.

    I try the Address 192.168.1.1 manuell.
    Not connect to webinterface or putty
    ?

    Marko Molnar April 2, 2015 at 2:45 pm

    Hello,

    Check that your PC is set to the same network as the router.

    Be sure that the router is unplugged from the internet when you try to connect. Then reconnect the internet before you run the script.

    Another way you can check the subnet is to set the PC to DHCP and check the ip address it receives, then connect to the gateway ip.

    Anonymous April 2, 2015 at 3:17 pm

    i have test
    192.168.1.5 -PC
    255.255.255.0
    192.168.1.1 -gate
    8.8.8.8 -DNS1
    8.8.4.4
    no ok

    or connect wan ip over fritzbox 192.168.178.26
    no ok wiht …178.

    stevehars April 2, 2015 at 3:37 pm

    Please try to access the router on 192.168.20.1 .
    From an appropriate IP address set on your PC.

    Steve

    Anonymous April 2, 2015 at 4:03 pm

    no ok all
    with …20.
    i have try …0.

    no ok
    hm

    Anonymous April 2, 2015 at 5:24 pm

    is factory.bin from this side with webinterface luci ?

    i think i must recover with serial ./. usb port

    Marko Molnar April 3, 2015 at 2:17 pm

    Set the PC to DHCP and check the ip address issued. Then connect to the gateway ip on that subnet.

    Are you able to ping the device? You should be able to use putty or a browser to login.

0 0

You must be logged in to reply to this topic.