Bullet 2 Hp Does Not Work With 4 Watt Amplifier Arg1205

  • Anonymous April 8, 2012 at 3:54 pm

    Bullet 2 HP does not work with 4 Watt amplifier ARG1205

    Hi, I was looking for something to help forum and my problem and found nothing. My problem is this. I installed a 2HP bullet with an omnidirectional antenna. And install a ARG1205 outdoors, the 2.4 GHz Signal Booster 4 watts. The signal reaches where before there had arrived and where the signal is weak now I have very good signal, the problem is that I can not connect to connect I have to be near the equipment. You do not have an idea of ​​what is happening. Now remove the amp and everything works fine. TX power settings 2HP to 15dBm. I hope your help with this problem. Thanks

    ARG1205 http://www.argtek.co…606/138606.html

    Quote:
    Spanish

    Hola, yo estaba buscando algo para ayudar a foro y mi problema y no encontraron nada. Mi problema es el siguiente. He instalado una bala de 2 HP con una antena omnidireccional. E instalar un ARG1205 al aire libre, los 2.4 GHz Signal Booster 4 vatios. La señal llega a donde antes no había llegado y donde la señal es débil ahora tengo muy buena señal, el problema es que no me puedo conectar para conectar tengo que estar cerca del equipo. Usted no tiene una idea de lo que está sucediendo. Ahora retire el amplificador y todo funciona bien. De potencia de transmisión de 15dBm configuración de 2HP. Espero su ayuda con este problema. Gracias

    Anonymous April 10, 2012 at 4:01 pm

    Hello,

    You have to keep in mind that the receiving device may not be able to transmit as far the router is. How far is the device from the router?

0 0

You must be logged in to reply to this topic.