cant make hotspotsystem working

  • Anonymous September 28, 2015 at 11:17 am

    hello, im sure im not an NET and wireless expert 🙂
    i have installed dd wrt firmware over a netgear router, everything goes well the router work fine but i cant make hotspotsystem working the most of the time, sometimes he work sometime after a fresh configuration on the router i cant access as a guest because the router dont give me the ip addres (i mean).
    I try many times to hard reset the router and make a new fresh configuration but i have 10 times the same problem, this is the steps i follow

    1) hard reset
    2) connecting via cabled LAN and also connecting the router directly to the internet
    3) changing the router IP from 192.168.1.1 to 192.168.2.1 because the ip 192.168.1.1 is already taken
    4) rebooting the router
    5) going to the services/ hotspost page of the router and setting up hotspostsystem.com with my operator name and location ID and then i put the right domain to insert (comma separated) in the next two blank text box the i check the “walled garden option” i save and apply changes

    at this point i found one of the two exixten wireless network renamed like myoperatorname_hotspotsystem_mylocation or something like that, try with my phone to find the net i found them and try to connect them but the phone say waiting for ip address all the time…

    sometimes i make the same steps without configuring anything different on the router and the hotspostsystem work great when at the end i try with my phone at least one second after the tap of the net my phone open the browser and ask to login with my facebook account… but after few days everithing is at the start point… so before i leave a stone over this experience (obviously for my lack of experience) i ask for the last time can i make something ? there is a magic wand ?

    Marko Molnar September 28, 2015 at 2:42 pm

    Hello,

    You are using a DDWrt build form 2015 which are all in beta. Use build 22118 (if available for your router) You can find it here: http://dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FBrainSlayer-V24-preSP2%2F2013%2F

    Be sure to reset the settings during flash.

    Anonymous September 28, 2015 at 3:31 pm

    Thank you, i have downgraded the firmware to the 12-12-2013-r23082, and setted up with the hotspotsystem settings making the same step as the previous firmware, but the hotspostsystem still not work… wats wrong ?

0 0

You must be logged in to reply to this topic.