- This topic has 21 replies, 3 voices, and was last updated 13 years, 11 months ago by
Anonymous.
Hi, Im Newbie Using The Hotspotsystem
-
Anonymous September 17, 2012 at 3:07 am
I have a problem , whith the Ubiquiti PicoStation2 HP , im dowload the firmware from the guide am installed
http://www.hotspotsystem.com/en/hotspot/install_guide_ubiquiti.html
But the chilli service not running (im click in start chilli and not working) .
What is wrong ;/
Anonymous September 17, 2012 at 8:29 amYou should check if there is a valid internet connection set up in the router. Chilli won't start if the internet settings are incorrect. Check if you can browse the internet without the chilli first.
Anonymous September 17, 2012 at 1:13 pmThe internet is working because my Ubiquiti is register in the hotspotsystem :/
WDS MAC Address IP address
System Load
Uptime OS
Last Seen
Ubiquiti Networks 187.136.78.49 0.10, 0.05, 0.00 2 days Ubiquiti 2012-09-17 05:29:10
Anonymous September 17, 2012 at 1:29 pmTry to set up your ISP's DNS in the Network Setup or use 8.8.8.8 which is google's free DNS service.
Anonymous September 17, 2012 at 1:30 pmAre the hotspot system fields pre-filled out on the Services tab / Hotspot system setup?
Anonymous September 17, 2012 at 3:30 pmWhen in chek the options
Login on splash page (combined):
and
Embedded Portal:

Chilli its working and the try to connect
But im not select the options chilli service not working.
what is the configuration correct from my hotspot?
Anonymous September 18, 2012 at 5:53 pmIm try edit the file configurations..
Chillit its worki
But i have conecte and open the Firefox .
Check the error .
ERROR: You must enable 'LOGIN ON SPLASH page' under Special Settings when you set up the router if you are using DD-WRT with built-in setup.
OR you can reset the firmware to default settings and re-run the command.
Anonymous September 19, 2012 at 9:35 amAs the text says…
You should check
LOGIN ON SPLASH page (combined) in the router's settings. Its there on the screenshot you uploaded.
Anonymous September 20, 2012 at 4:49 amOr what is the configured fine , so that hotspotsystem works?
Anonymous September 20, 2012 at 9:16 pmIs the same “error”
ERROR: You must enable 'LOGIN ON SPLASH page' under Special Settings when you set up the router if you are using DD-WRT with built-in setup.
OR you can reset the firmware to default settings and re-run the command.
Anonymous September 20, 2012 at 9:23 pmDid you apply the changes? Please send an other screenshot where the changes can be seen.
Anonymous September 21, 2012 at 1:44 amhttp://i45.tinypic.com/15dazr6.png
check i have select the option “ Login on splash combined”
and aplicated change …… and the chilli service not work :/

You must be logged in to reply to this topic.