Hotspot Configuration Problem Using Coovaap

  • Anonymous December 28, 2013 at 12:11 pm

    hi all,

    i’m facing problem during hotspot setup as i’m follow all the step by step that your website provide.

    here my outcome :

    root@CoovaAP:~# wget -O /tmp/setup.sh http://www.hotspotsystem.com/controlcenter/install.php?operator=smkkj&location=2&version=openwrt; chmod 755 /tmp/setup.sh; /tmp/setup.sh; replace crontab from file

    – replace crontab from stdin

    -u user specify user

    -l [user] list crontab for user

    -e [user] edit crontab for user

    -d [user] delete crontab for user

    -c dir specify crontab directory

    kill: 13: No such process

    eval: 13: wlanconfig: not found

    eval: 13: wlanconfig: not found

    s: applet not found

    s: applet not found

    s: applet not found

    Hangup

    root@CoovaAP:~#

    I have already subcribe to white label and i’m using WRT54GL v1.1 and coovaAP version 1.0-beta.12

    need your quick respond

    thanks..

    Anonymous December 28, 2013 at 6:28 pm

    Also experiencing a similar issue at the same step while following the installation guide for CoovaAP:
    http://www.hotspotsystem.com/installation-guide-coova

    I noticed that the “ROUTER SETUP COMMAND FOR THIS LOCATION” lists only “OpenWrt” under firmware and “CoovaAP” is not an available option as the installation guide states.

    See attached screenshot:
    http://oi40.tinypic.com/2jg0zzk.jpg

    Anonymous December 29, 2013 at 1:14 am

    Dear Administrator,

    Please answer this issue as soon as possible because my hotspot will be start using the user by 30 december. Really appreciate your response.

    Thanks

    Anonymous December 30, 2013 at 10:31 am

    The “HotspotWRT/CoovaAP” option is now appearing in the control center for “ROUTER SETUP COMMAND FOR THIS LOCATION”, generating the appropriate setup commands as required by the install guide for CoovaAP.

    UPDATE:

    Everything installed smoothly and is working perfectly on a WRT54G v3 without any problems using the correct set of commands.

0 0

You must be logged in to reply to this topic.