No login screen, no username/password

[Anonymous]

Two issues

1) No login screen, users have open access
2) After router reset button pushed, router login web gui asks for username/password, but cant figure out usernamepassword

I can run remote commands, like change SSID no problem. I see the router online in my “Manage Locations”

The router is a linksys WRT54G V2.2 With Hotspotsystem firmware. Ran fine for a long time until last month.

Thanks

[stevehars]

Hi Willem,

For the WRT54G we recommend DD-WRT build 22118, from here:
http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2013/07-24-2013-r22118/broadcom/dd-wrt.v24_std_generic.bin

You may need to upgrade to 21061 first:
http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2013/03-25-2013-r21061/broadcom/dd-wrt.v24_std_generic.bin

Please reset the router to factory defaults from Administration>Factory defaults after replacing the firmware every time.
You’ll no longer be able to run remote commands with the new build, but it will work flawlessly. Old builds are very old now and can’t communicate perfectly with today’s devices every now and then.

Steve

[Anonymous]

For the WRT54G we recommend DD-WRT build 22118, from here:
http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2013/07-24-2013-r22118/broadcom/dd-wrt.v24_std_generic.bin

I tried to upgrade to this firmware from 14998 build of dd-wrt and now my router is bricked…

[Anonymous]

I HAVE A TP LINK TLWR740N, CHANGE THE FIRMWARE TO DD-WRT, AND THEN, SET UP TO HOTSPOTSYSTEMS IN CONTROL PANEL, BUT, WHEN I GO TO WEB DONT SEE THE HOTSPOT SYSTEM WEB PAGE. AND I CAN GO TO WEB WITH OUT RESTRICTIONS.