No Splash Screen Ddwrt

  • Anonymous December 31, 2013 at 7:40 am

    Hi,

    I am using a DLINK 825 with DDWRT, latest build.

    Everything looks to work fine, I get an IP adress, with correct DNS and Domain.

    But I dont get the login/splash screen.

    The router is behind another router.

    Please give some advice.

    Anonymous January 2, 2014 at 2:45 pm

    I’m in your situation too 🙁 🙁 🙁

    http://www.hotspotsystem.com/wififorums/topic/394-linksys-wrt54g-no-splash-screen-only-direct-connection-help-me-to-set-the-right-config-please/

    Anonymous January 4, 2014 at 12:34 pm

    Hello,

    what build are you using? What IP address do you get from the router? We need more information.

    Thanks!

    Anonymous January 8, 2014 at 10:25 pm

    Hi all,

    I have the same problem after upgrading router with 22118 build. Previous build r21676 was working without problems.

    I have followed instructions from page about 22118 build. I also receive right IP address 192.168.182.2.

    Please advice what to do. My router is WRT160NL.

    KR

    Bogdan

    Anonymous February 19, 2014 at 9:51 am

    Hello,
    i’ve the same problem… the hotspot gives the connection without logging into facebook!!

    i’ve got a TPLINK 842ndv1 router and the version of the firmware is DD-WRT v24-sp2 (07/24/13) std
    (SVN revision 22118)

    do you know what can be the problem?

    Thank you a lot

    Enrico

    Anonymous March 27, 2014 at 9:35 pm

    I have the same, using a TP-LINK WDR4300 with DD-WRT with 3-13-2014 r23720. I did configure the hotspot like described but don’t get to the splash screen. Any solution?

    Anonymous March 29, 2014 at 1:15 am

    I too am having the same issue. Have reverted back to 21676. I did only try with 23720 (the latest build) I did not try 22118.

    Anonymous March 29, 2014 at 10:16 pm

    I may have found the solution: I have a 2nd SSID on which I configured hotspotsystem. To configure it you need to set Network Configuration to “unbridge” is so that you can appoint the SSID to the hotspotsystem (in my case ath0.1).

    I did see at a later stage a description in which it was explained that you need to change the Network Configuration of the virtual interface into “bridged” . I thought this wasn’t right as the hotspotsystem interface referts to LAN. But it turns out it actually works…

    Now I need to get the AP isolation to work (I want all users able to only access the internet not the local LAN) and somehow I cant get it to work with Android devices. With IOS and Windows you get an automatic login.

    Anonymous May 12, 2014 at 7:47 pm

    Hi,
    i have the same problem after upgrading router with 22118 build.
    With previous build all was working without problems.
    I have followed instructions from page about 22118 build.
    I also receive right IP address 192.168.182.2.
    My router is TP-Link TL-WR841ND v7.

    Marco

    Anonymous May 12, 2014 at 8:46 pm

    There is someone that solved this issue?

    stevehars July 1, 2014 at 4:37 pm

    Apparently TL-WR devices have problems above 21061, but local DNS(set to 8.8.8.8) should solve these.

    Steve

0 0
Tagged: 

You must be logged in to reply to this topic.