- This topic has 3 replies, 2 voices, and was last updated 13 years, 7 months ago by .
No Splash Screen, Gives Free Internet
You must be logged in to reply to this topic.
WRT300N V1
.v24 standard DDwrt firmware 14896
So I can get free internet, but i never see the splash page on a wifi client . they just connect DHCP and get internet. Ive checked Services -> Hotspot -> Login on Splash Screen.
I dont understand how I'm supposed to connect the router, the instructions aren't very clear I've read it 7 times.
If my cablemodem goes to my NORMAL router (#1) then………
[sharedmedia=core:attachments:126]
IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 DHCP Server: Enable Start IP Address: 192.168.1.100 End IP Address: 192.168.1.107
AND I HAVE A 2nd ROUTER that will be my hotspot……
Do i Connect it to my HOTSPOT router's WAN or LAN port with the cable? (a 2nd router, not my primary router)
WHAT SHOULD BE my hotspot routers (#2) LAN IP? 192.168.20.1?
WHAT SHOULD BE my hotspot routers (#2) WAN IP? auto? disabled?
[sharedmedia=core:attachments:127]
Hotspot SystemEnable Disable
[sharedmedia=core:attachments:128]
Operator Username
Location Number
Separate Wifi from LAN BridgeEnable Disable
DHCP Interface
LAN eth0 eth2 etherip0 <
i have LAN, eth0, eth2, etherip0
if i create a 'virtual wireless' like in the instructions,
then all i get are extra SSIDs that show up on my
pc clients wifi list. 'dd-wrt' and 'virtual wireless'
do i use one of these or do i make the 'virtual wireless'?
thanks i have spent 5 hours trying to get this to work – :>
sorry the formatting totally erase all the settings text above
OK THANKS! looks like i finally got it to work by downgrading to fw v24 14311, and applying the setup command!
Hello,
Yes, 14311 is a much better build, 14896 is buggy. Have you set your second router correctly?
Regards,
Istvan Hars,
Helpdesk @ hotspotsystem.com
You must be logged in to reply to this topic.