• This topic has 3 replies, 4 voices, and was last updated 11 years ago by Anonymous.

Router Config

  • Anonymous February 23, 2015 at 5:12 pm

    Hi, I am trying to set up my router so that i can get this synced on your control centre. I have one master router which is a BT home hub linked to a TP LINK with DD WRT installed. The router is linked to the BT homehub via ethernet cable from port 1 to port 4 in the TP link. First of all should i be running my ADSL line direct into the TP link? I have also attached a file with what i have done so far within the TP-Link DD WRT router and i am still unable to lync this up with your on line system. I am really keen to get this working as if i can figure this out at my home location i intend to roll this out to some of my business locations and pay for the PRO version. I am at this time able to use the DD WRT router for internet so i am really confused on this so far. Really look forward to your help and i have attached screen shots of the current set up Thanks Jamie

    Roland Kosarszky February 23, 2015 at 9:24 pm

    Hi,

    we cannot see the screenshots, try to upload them one by one in jpg format.

    stevehars February 24, 2015 at 10:37 am

    Hi Jamie,

    The most important things with any configuration:

    You need to use the ADSL modem to connect to the line first.
    The TP-Link should be connected by its WAN (internet) port to the ADSL modem.
    You need to make sure the TP-Link is not configured to the IP subnet used on its WAN side (see Status > WAN or he top right corner for the IP WAN address).
    Please read the troubleshooting tips in the DD-WRT guide carefully. 8.8.8.8 should be used under Setup > Basic setup > Network setup > Router IP.
    It’s safe to use DD-WRT builds from here for the TP-Link routers:
    http://dd-wrt.com/site/support/other-downloads?path=betas%2F2014%2F06-23-2014-r24461%2F

    Steve

    Anonymous August 28, 2015 at 9:36 pm

    Tuturial video for many, dd-wrt and mikrotik
    I like this site but nothing until the time to redirect to social login

0 0

You must be logged in to reply to this topic.