This topic has 8 replies, 3 voices, and was last updated 11 years, 3 months ago by Anonymous.

Router Seen In Devices, But no Login or Splash Page

Anonymous May 20, 2015 at 11:41 pm

I have a wrt54g linksys router that I have setup with:

OpenWrt Firmware
Kamikaze (r14417)
Load: 0.68 0.24 0.09
Hostname: OpenWrt

All wifi users can use the network with unrestricted access. Some help would be appreciated.

Thanks,
Chris

Anonymous May 20, 2015 at 11:46 pm

Here is a screenshot of what I am working with.

Let me know what I need to do.

Thanks,
Chris

Marko Molnar May 21, 2015 at 1:40 pm

Chris,

You can set up OpenWRT with the install guide: http://www.hotspotsystem.com/installation-guide-openwrt

You can also use our modified OpenWRT image and the installation requires less steps, see: http://www.hotspotsystem.com/openwrt-hotspot-setup

stevehars May 21, 2015 at 4:42 pm

Hi there,

You need to use this firmware for the WRT54G up to V4:
http://www.hotspotsystem.com/firmware/openwrt/LINKSYS/openwrt-wrt54g-squashfs.bin

If it only accepts trx files then this one:
http://www.hotspotsystem.com/firmware/openwrt/LINKSYS/openwrt-brcm-2.4-squashfs.trx

Steve

Anonymous May 22, 2015 at 5:21 pm

ok,

I can get in via ssh now, but the router will not give an IP address and will not connect to the internet so it cannot use the wget command to download everything necessary.

Any thoughts?

Anonymous May 22, 2015 at 7:43 pm

I can’t get on the internet and connect to the router. It’s either one or the other. Could you explain a work around?

Thanks,
Chris

Anonymous May 22, 2015 at 7:54 pm

I fixed it with installing the standard generic version of DD-Wrt.

Anonymous May 22, 2015 at 8:39 pm

having troubles setting up the dd-wrt.

can’t get the splash page to show up.

Anonymous May 22, 2015 at 10:19 pm

Ok,

Could you give me the correct firmware for the linksys wrt54g v1.1?

0 0

You must be logged in to reply to this topic.

HotspotSystem Forums

Router Seen In Devices, But no Login or Splash Page