Router TPLink 841 V.10 & FW DDWRT v.30

  • Anonymous April 4, 2016 at 11:18 am

    Good morning,
    I purchased a used router TP LINK WR841 v. 10, and I made the FW update with DDWRT Beta 30, I tried some of the latest versions of the FW DDWRT version 30.

    For this router is only available version 30, however, when the HOT SPOT function activated in fact ceases internet browsing, and you can no longer use the router.

    Up to 24 version of ddwrt with another router WR941 V3, he could not handle.
    Settavo in “Network” OLSRRouter and everything worked properly.

    The version of this router seems to be incompatible.
    Are there any tips on how to fix it?

    Thanks Andrea.

    Anonymous April 4, 2016 at 5:11 pm

    I have the seem problem,
    my router is tplink wr 841 nd

    Anonymous April 4, 2016 at 5:30 pm

    We hope that the system operators give us a hand. I tried to install the FW OpenWRT where there is DDWRT but do not want to install.

    Remains installed DDWRT and OPEN WRT does not go on! Another problem. Perhaps with OPEN WRT worked!

    Hallo!

    Anonymous April 24, 2016 at 10:03 pm

    to flash openwrt firmware you have to re flash original firmware first and then flash openwrt firmware.

    you can download original firmware from tplink site.

0 0

You must be logged in to reply to this topic.