TL-WR841ND v10 HotSpotSystem No Work

  • Anonymous March 10, 2016 at 3:53 pm

    Hello,
    we are trying to configure the router TP-Link TL-WR841ND v10, using HOTSPOTSYSTEM service. The router is installed Firmware: DD-WRT-r28846 std v3.0 (01.16.16). We configured the section of the HotSpot service with the parameters that you can see in the screen shot attached. We tried several times the configuration but we could not make it work as it should. Does not it redirect the hotspot service. How should we configure the router so that the hotspot service is working correctly?

    Siroki Istvan March 10, 2016 at 7:29 pm

    Hi,

    The TP-Link TL-WR841ND v10 is a quite tricky router, since we can’t support it via our custom OpenWRT firmware, so your only option is DD-WRT. The problem with that is it can be quite unpredictable how it behaves, what bugs surface from build to build. I’m terribly sorry, but all I can say look for a newer build here

    Anonymous March 19, 2016 at 2:26 pm

    stefano io ho il tuo stesso problema, sei riuscito a risolverlo???, io ho fatto diversi tentativi ma nulla con sto v10, se hai trovato il firmware che funziona mi potresti indicare quale, se lo trovo io lo indico io grazie a presto fabio milazzo

    Anonymous June 12, 2016 at 7:29 pm

    ciao stefano e ciao fabio avete risolto?

    Anonymous September 7, 2016 at 5:27 pm

    Ragazzi risolto? Io ho un v11 e ho installato il Firmware: DD-WRT v3.0-r30534 std (09/01/16)

    Anonymous September 7, 2016 at 10:01 pm

    La configurazione che ho postato prima è corretta il control Center rileva il router, ma una volta loggato con il wifi non riesco ad accedere alla splsh page.

    Anonymous December 23, 2016 at 4:32 pm

    Ciao Alfredo,

    hai risolto in qualche modo?

    Mauro

0 0
Tagged: 

You must be logged in to reply to this topic.