Ubiquiti airrouter does not login Openwrt

  • Anonymous November 7, 2015 at 1:57 am

    I have one AirRouter that after I install this new openwrt, doesn´t ping.
    I updated the original firmware AirOS V.5.6 (updated) , to openwrt-ar71xx-generic-ubnt-airrouter-squashfs-factory.bin . It was in this moment only connect lan cable without the line plug in. (don´t think that matters but I explain all with detail)
    I flash the firmware, and reboot, but now you can even make a ping on it.

    I disconnected my firewall, with the two cables (lan and line ) plug in , try to set the password from Putty telnet way and nothing.

    I red the other topic, when you recommend another firmware from Hotspot but now I cant even flash again the router.

    Marko Molnar November 9, 2015 at 11:27 am

    Hello,

    From a PC connect directly to the router. Set a static ip address on the 192.168.1.0 network and see if you can conenct to 192.168.1.1. You can also try this procedure with the 192.168.20 network.

    It may be easiest to just go through the following procedure to reset the router: http://help.hotspotsystem.com/knowledgebase/forgotten-passwordresetting-openwrt-configuration

0 0
Tagged: 

You must be logged in to reply to this topic.