Users Not Redirected To Authentication Server

  • Anonymous November 8, 2012 at 4:19 pm

    I am having Asus router with Firmware:DD-WRT v24-sp2(07/20/12)std

    Configured dd-wrt to use hotspot system.Filled every field other than Remote network.But users are not taken to authentication servers instead they can access every websites with out going to the authentication server.

    Network:Topology

    Router1:Asus with ddwrt and hotspot with wifi n/w 192.168.1.0/24

    Router2:Connected to modem and has internet connection with no wifi n/w 192.168.2.0/24 .

    users connect through wifi on router1 and instead of taking to hotspot authentication they have been taken to any site of their choice…

    Anonymous November 8, 2012 at 6:41 pm

    When using a newer build you should create a virtual interface. See this article: http://www.hotspotsystem.com/deskpro/kb_article.php?ref=2729-IZCM-3054

    Anonymous November 23, 2012 at 9:17 am

    Hi,

    Here my router configuration :

    • Router TP LINK

    • DD-WRT 2.4

    • BUILD around 19500

    • Hotspot system correctly setup with the embeded module

    I create the virtual interface and it's working well ( redirection, vouchers,…) on dd-wrt_va

    But the main connection dd-wrt is still available and open with no captive portal.

    • I try to disable the Broadcast of the network name : virtual network is no longer accessible also

    • I try to secure the main connection : virtual access is no longuer available too

    What is the best solution to be sure all the users will be using just my Hotspot System redirection page ?

    Anonymous November 26, 2012 at 10:36 am

    I did some testing with your build and I was able to turn off broadcasting of the physical interface without the virual one disappearing.

    What do you mean by securing the main conection? Which encryption protocol did you use? Some don't sem to work, but you can use WEP, see this article: http://hotspotsystem.com/deskpro/kb_article.php?ref=1364-WLXB-3087

0 0
Tagged: 

You must be logged in to reply to this topic.