This topic has 4 replies, 5 voices, and was last updated 12 years, 2 months ago by Anonymous.

Use Additional Ap's

Anonymous March 3, 2014 at 7:17 pm

I have a airrouter with openWRT. I would like to add my own AP’s behind the airrouter that would have the same controls as the WiFi interface on the airrouter.

If I login to the airrouter via WiFi I get the hotspot login sceen but if I connect thru an AP connected to the lan ports on the airrouter I get full internet access.

How do I set the lan ports to be forced to go thru the hotspot portal for internet access?

Anonymous April 4, 2014 at 4:18 pm

under hopspot system in your router change settings
Separate Wifi from LAN Bridge to Disable
it will work

Roland Kosarszky April 9, 2014 at 4:42 pm

Here is the knowledgebase article: http://help.hotspotsystem.com/knowledgebase/offer-hotspot-service-via-the-lan-ports-wired-connection

Anonymous June 30, 2014 at 6:16 pm

Roland – this article does not include directions for my airrouter hotspot in a box firmware. Do you have instructions for that ?

Anonymous June 30, 2014 at 9:33 pm

When I’m trying to access the “defaults” file located in /etc/chilli , i get permission denied. How do I fix that? I’m using ubiquity AirRouter with OpenWRT.

0 0

Tagged: AP lan ports

You must be logged in to reply to this topic.